907 / 2022-08-15 10:01:29
Simulation of Space Charge Characterization Signal Based on Laser Vibration Measurement
space charge,laser doppler measurement,half peak width,Gaussian pulse signal
终稿
SUN Guoqiang / Shanghai Jiaotong University
建东 吴 / 上海交通大学
Xin SHEN / 上海交通大学闵行校区
毅 尹 / 上海交通大学
   Piezoelectric sensor, the core device of pulsed electro-acoustic method (PEA), is limited by the properties of piezoelectric materials, so it is difficult to detect three-dimensional charge distribution at high temperature. Laser Doppler vibration measurement technology overcomes the shortcomings of PEA method, and can replace piezoelectric sensors to achieve high-precision detection of acoustic signals. In this paper, according to the performance parameters of laser Doppler vibrometer(LDV), a space charge signal characterization simulation model based on laser Doppler vibration measurement is established to study the influence of Gaussian pulse half peak width on the characterization signal. The results show that when the half peak width is 500ns, the frequency band of the vibration signal is within 3MHz, and the amplitude is 230pm. After filtering and quantization, the vibration signal can well characterize the charge distribution and the spatial resolution of 1mm can be achieved; When the half peak width is 10ns, the bandwidth of the vibration signal is within 200MHz, and the amplitude is 232.6pm. After filtering, the amplitude is attenuated to 13.75pm, which is lower than the displacement resolution of LDV, and the output signal is zero. The analysis shows that the half peak width should not be less than 500ns to ensure that the characteristic signal waveform can characterize the charge distribution without sacrificing spatial resolution.

 
重要日期
  • 会议日期

    09月25日

    2022

    09月29日

    2022

  • 08月15日 2022

    提前注册日期

  • 09月10日 2022

    报告提交截止日期

  • 11月10日 2022

    注册截止日期

  • 11月30日 2022

    初稿截稿日期

  • 11月30日 2022

    终稿截稿日期

主办单位
IEEE DEIS
承办单位
Chongqing University
移动端
在手机上打开
小程序
打开微信小程序
客服
扫码或点此咨询