352 / 2019-03-14 10:47:13
Properties of Water Tree Growing in XLPE and composites
Water tree; Nanoparticle; Elastic modulus; Crystal morphology
终稿
Yu Qingyue / Shandong University of Technology
Li Xiufeng / Shandong University of Technology
Zhang Peng / Shandong University of Technology
Yang Peijie / Nanjing Zhongchao New Materials CO., LTD
Chen Youfu / Nanjing Zhongchao New Materials CO., LTD
Crosslinked polyethylene (XLPE) is widely used as insulation material in medium-voltage and high-voltage power cables due to its excellent electrical performance and aging resistance. However, in humid environment, XLPE cables are apt to be treed and degrade the dielectric performance. The water tree would easily lead to the growth of electrical tree and then cause permanent damage of insulation. The service life of power cable is threatened by those factors. Therefore, it is especially important to study the growth characteristics and influencing factors of water trees in XLPE. In this paper, the lamellar nano-montmorillonite (MMT), spherical nano-silicon dioxide (SiO2) and polar ethylene-vinyl acetate copolymer (EVA) were blended with XLPE by melt blending method, and the effects of the three kinds of dopants on mechanical properties, structural morphology and water tree growth characteristics of XLPE were studied. The results show that the modified XLPE sample has a higher elastic modulus and better toughening effect that was attributed to the increased absorption of impact energy during plastic deformation and the reduced damage of polyethylene molecular chain caused by the periodic deformation of water droplets under the action of the electric field. Thus the growth of water trees is inhibited. The dopant with different structures significantly modify the crystal morphology of XLPE, homogenizing the crystal size and optimizing the crystal structure, which makes the diffusion path of water molecules more tortuous, and the diffusion of water was slowed down.
The accelerated water tree aging tests were conducted on the composite samples with water-needle electrode method, the morphology of water-tree was observed by microscope and the length was statistically analyzed. According to the result, it can be concluded that water tree length of composites with MMT, SiO2 and EVA are decreased compared with pure XLPE. The XLPE/SiO2 nanocomposite has the shortest branch, which decreased by 54.1% along the electric field direction and by 48.7% in the vertical direction of the main electric field. For the sample with XLPE/MMT, the length of water trees are being reduced by 57.5% and 18.8% along the direction of and in the vertical direction of the main electric field respectively. In addition, the water trees morphologies were obviously different. The water trees of pure XLPE grows uniformly in divergent form, while the growth of the water tree of XLPE/MMT was non-uniform diverging from the tip defect with more "branches". As to the sample with XLPE /SiO2, the water tree was relatively uniform with few branches and smooth edge.
重要日期
  • 会议日期

    04月07日

    2019

    04月10日

    2019

  • 04月10日 2019

    注册截止日期

  • 05月12日 2019

    初稿截稿日期

主办单位
IEEE电介质和电气绝缘协会
中国电工学会工程电介质专业委员会
承办单位
华南理工大学
移动端
在手机上打开
小程序
打开微信小程序
客服
扫码或点此咨询