43 / 2020-09-24 21:02:07
Simulation and Experimental Analysis of DC Arc Characteristics in Metal Splitter Plate
Arc Motion, High Voltage DC Relay, MHD, Splitter Plate
终稿
Huang Xin / Fuzhou University
Xiangjun Liu electrical contact theory and contact material, i / Fuzhou University
Gas medium (N2, H2 or N2-H2 mixtures) and magnetic field are usually applied to extinguish the arc in high-voltage direct current (HVDC) relays. The presence of hydrogen will increase the probability of arc restriking, and when the arc extinguishing chamber is poorly sealed, it may also cause an explosion. The nitrogen reduces the probability of arc restriking, but the arc extinguishing time is similar to air. Therefore, in order to enhance the ability of arc extinguishing, avoid the arc restriking and increase the lifetime of the HVDC relay, the characteristics of the arc in the metal splitter plate and that of the arc root motion in the magnetic field are simulated by means of magnetohydrodynamics (MHD). The voltage and images of the arc are obtained by DC Arc Test System. The results show that increasing the external magnetic field is beneficial to the motion of the arc and shortens the time of arc movement on the contact surface. At the same time, the addition of the metal splitter plate on both sides of the contact is beneficial to increase the arc voltage and accelerate the arc extinguishing.

 
重要日期
  • 会议日期

    11月02日

    2020

    11月04日

    2020

  • 10月27日 2020

    初稿截稿日期

  • 11月03日 2020

    报告提交截止日期

  • 11月04日 2020

    注册截止日期

  • 11月17日 2020

    终稿截稿日期

主办单位
IEEE IAS Student Chapter of Huazhong University of Science and Technology (HUST)
承办单位
Huazhong University of Science and Technology
联系方式
移动端
在手机上打开
小程序
打开微信小程序
客服
扫码或点此咨询